DIY Insect Taxidermy for a Happy and Creepy Halloween

It’s fall, which means it’s time to start thinking about Halloween. Want to freshen up your Halloween holiday décor but finding spare hours hard to come by? This is the perfect DIY project – it’s fast, easy, and inexpensive. This DIY décor is actually pretty versatile; I’m thinking of using it year-round, not just for Halloween. Because who doesn’t love taxidermy, and who doesn’t love unexpectedly oversized, golden insects? (Hey, one out of two isn’t bad…)

DIY Insect Taxidermy

DIY Insect Taxidermy for a Happy and Creepy Halloween

Let’s get started.

DIY Level: Beginner

DIY Insect Taxidermy - supplies

Materials Needed:

  • Large plastic insects
  • Unfinished wooden plaque(s)
  • Black sticky mounting dots, hot glue gun, and/or super glue
  • Gold spray paint
  • Flat (matte) black spray paint
  • 3M hanging strips

DIY Insect Taxidermy- prepare the bugs

Lay out the insects with their bellies facing upward.

 

DIY Insect Taxidermy-shake your gold spray

Shake your gold spray paint to prepare for painting. (Tip: Use a paint + primer for best adhesion and coverage.)

DIY Insect Taxidermy- start srpaying

With light, sweeping motions, spray paint the undersides of the bugs.

DIY Insect Taxidermy-play several coats

You’ll apply several coats, so don’t worry so much about getting an even coat of paint right off the bat. Focus on light coats.

DIY Insect Taxidermy - spray from different angle

Reposition yourself and spray paint the bugs from different angles. These things are leggy, so you’ll want to hit the bugs from every angle to make sure they turn completely gold.

DIY Insect Taxidermy- flat black spray paint

While the bugs are drying, shake your matte black spray paint to prepare it for spraying the mounting boards.

DIY Insect Taxidermy- spray paint the wood in black

(You can choose smaller plaques and mount the bugs individually if you want.) Paint, once again, in light, sweeping motions across the length of your plaques. For best results, follow the wood grain.

DIY Insect Taxidermy-apply more then one coat of flat black

As always while spray painting, don’t worry about full coverage with the first, or even second, coats. They will look weak and blotchy at first; that’s perfectly normal and fine. You’ll even everything out as you let each coat dry for a few minutes and hit it again with the next coat. Alternate spraying your wooden plaques and your golden bugs (flip these over so you can spray the tops), waiting 5-10 minutes between coats but no more than an hour between coats. Allow them to dry completely after the last coat.

DIY Insect Taxidermy- arrange your gold painted bugs

Arrange your now-golden bugs on the plaques in the order and placement that you like best.

DIY Insect Taxidermy-sticky mounted dots

Place black sticky mounting dots (or hot glue or super glue, if that’s what you’ve chosen to use) on the parts of your bugs’ bodies that make contact with the mounting board. Also attach any legs or antennae that you want, for added support and also repositioning, in the case that your bugs came squashed and slightly askew.

DIY Insect Taxidermy- prepare to display

After the bugs are attached, you’re just about done!

DIY Insect Taxidermy for Halloween

Don’t you love these? They’re the perfect Halloween décor – creepy and fun, but still somewhat sophisticated. Somewhat.

DIY Insect Taxidermy- hanging

Use 3M commandpicture hanging strips to hang your insect taxidermy boards on the wall, whether just for Halloween or for year-round enjoyment.

DIY Insect Taxidermy-hang your halloween art

Hang up your boards with pride.

DIY Insect Taxidermy - a touch of glam for Halloween

The gold-on-black looks glamorous, but the content is perfectly whimsical. I just love the contrast of those two elements.

DIY Insect Taxidermy-flanking an art

Use them flanking a mirror or artwork above a mantel, on a front entry table, or anywhere for a visual pick-me-up.

DIY Insect Taxidermy- insects are preaty big

These insects are 4”-6” long, which adds to the fun visual aspect of this DIY project.

DIY Insect Taxidermy- Angle View

They’re big enough, in fact, that there is a distinct 3-D element. Just like any taxidermy project should have, really.

DIY Insect Taxidermy- decorate the staircase wall

Happy Halloween! (Or whenever you want to highlight some bugs in your décor.)

You’re reading DIY Insect Taxidermy for a Happy and Creepy Halloween , originally posted on Homedit. If you enjoyed this post, be sure to follow Homedit on TwitterFacebook and Pinterest.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s